GSE Studliner Photo Gallery

click on any image below to open a full size picture view

• 
  42 inch fully HDPE lined concrete pipe project in strathcona County Albertal Canada featuring GSE Studliner and electro-fusion weld technology
• 
  Fully 360 degree HDPE lined concrete pipe segment are water tight, corrsion proof, and eliminate infiltration and exfiltration common with 270 degree lined pipes.
• 
  GSE exclusive electro-fusion pipe joint welding process revolutionizes the large diameter HDPE lined concrete pipe welding process. This computorized process reduces human error, and is very fast and strong.
•  
• 
  Fully 360 degree lined 54 inch concrete pipe segments, electro-fusion welded. These are water tight, corrosion proof, and designed to withstand severe seismic activity as well as high head pressure from ground water.
• 
  9000 lb. 54 inch lined pipe segments, electro-fusion welded and then lifted from one end to demonstrate ability to withstand seismic activity and maintain joint integrity
• 
  42 inch gravity sewer interceptor being installed in Strathcona County Alberta CA in high ground water area, using electro-fusion weld process on HDPE lined pipe. GSE Studliner was used for its ability to withstand hi head pressure.
•  
• 
  Custom junction structure, lined with GSE Studliner voted 1 place winner in the 2005 National Precast Concrete Association CUP awards for underground precast concete projects.
• 
  Manhole features a lined base & riser welded water tight with special hi-head pressure HDPE boots and a concrete channel protected by .75 inches of polymer concrete. Channel is a secondary pour.
• 
  Precast junction structure lined with GSE Studliner being built by crews at US Concrete in Pleasanton CA.
•  
• 
  New HDPE lined manhole being installed on existing pipe using GSE Studliner Portland Oregon
• 
  Collapsible forms are lined with GSE Studliner factory prewelded tubes. Forms are then expanded, and lowered into the manhole and liner is grouted into place.
• 
  60 Inch diameter manhole being rehabilitated using GSE Studliner, the material of choice for long term rehabilitation.
•  
• 
  Manhole undergoing rehabilitation using GSE Studliner
• 
  Recently rehabilitated manhole on Lake Oswego features GSE Studliner and unique hi-flow Roto-molded HDPE inside drop from Royal Enterprises. All work was performed from barges.
• 
  This is a very unique manhole rehab project. Eleven large manholes and several smaller manholes actually in Lake Oswego OR. were rehabilitated using GSE Studliner
•  
• 
  Manhole rehabilitation using GSE Studliner. Collapsible forms are used in conjuntion with 5,000 PSI grout to make your manholes like new!
• 
  Photos show GSE Studliner on the concrete forms pryor to the pour on a large cast in place concrete tank
• 
  GSE Studliner is the material of choice for large concrete structures such as the Durham WWTP. This was our first project for the district.
•  
• 
  GSE Studliner is the product of choice for large waste water treatment plants built by Clean Water Services in Oregon. The Durham plant was our first project with the district.
• 
  GSE Studliner is the ideal choice for large complex cast in place concrete structures that require long term corrosion protection.
• 
  GSE Studliner is the product of choice for large cast in place structures that require long term corrosion protection
•  
• 
  Maohole Features Fully Lined Base & Risers with Welded HDPE Custom Booted Penitrations. Bench is a Poured and Hand Troweled with a 1 Inch Layer of Polymer Concrete for Corrosion and Errosion Protection.
• 
  Flexible water tight HDPE booted pipe connections for concrete structures lined with GSE Studliner
• 
  This photo shows a lined concrete manhole transition structure. Ductile iron to HDPE lined concrete.
•  
• 
  GSE Studliner is the ideal choice for large diameter precast manholes and concrete pipe for gravity sewer applications. Water tight and corrosion proof construction. The compressive strength of concrete with all the advantages of plastic pipe, and none of the problems. Let Titus Industrial Group Inc. help design the ideal gravity sewer for your application.
• 
  Deep precast concrete structures in high ground water areas with hi head pressure are the perfect application for GSE Studliner. With the highest pullout strenght in the market Studliner can easily withstand up to 90 feet of static head pressure insuring a water tight structure.
• 
  Photos show a booted pipe connection using a HDPE welded boot.
•  
• 
  GSE PolyLoc is use as a water stop on installations where only the upper portions of a tank are lined. PolyLoc prevents water migration behind the liner.
• 
  GSE Studliner is the ideal choce for tough projects like this digester dome with numerous penitrations. Our installation crews are highly skilled in fabrication and installation of GSE Studliner on major projects such as this anaerobic digester at the Brightwater WWTP in King County WA.
• 
  Hi quality extrusion welding of GSE Studliner is one of the welding techniques used by our highly skilled welding techs. Welds are typically stronger than the base material.
•  
• 
  Lewis Titus president & owner of Titus Industrial Group Inc. inside one of the four anaerobic digester tanks at the Brightwater WWTP in King County WA.
• 
  GSE Studliner inspection Brightwater WWTP
  Lewis Titus president and owner of Titus Industrial Group Inc. preparing to go for a boat ride inside the anaerobic digester tanks at the Brightwater WWTP to inspect the Studliner installation.
• 
  Photo captures GSE approved welding contractors workng on the domes at the Brightwater WWTP King County WA.
•  
• 
  GSE Studliner was the material of choice for the Brightwater WWTP in King County WA anaerobic digesters. Aeral view show tanks under construction.
• 
  GSE Studliner is the ultimate material for corrosion, and I & I control on both Precast Concrete & Cast in Place structures such as this project in Southern CA.
• 
  GSE Studliner is the material of choice for large cast in place concrete structures such as this pump station project in Southern California
•  
• 
  Photo captures the construction of one of 4 large anaerobic digesters at the Brightwater WWTP for King County WA. Project engineers chose GSE Studliner for Corrosion protection.
• 
  Photo captures the installatio of a 42 inch 360 degree HDPE lined concrete pipe featuring GSE Studliner. The system is designed to withstand up to 90 feet of static head pressure.
• 
  Photo shows our unique electro-fussion welding technology, and 360 degree vacuum testing equipment used for large diameter HDPE lined concrete pipe.
•  
• 
  This photo shows the smooth transision from a lined juntion structure manhole to a lined concrete pipe using a hi-pressure internal boot.
• 
  GSE Hi-pressure boots are designed to be used in areas where hi ground water can be expected. These specially designed boots can withstand up to 90 feet of static head pressure. They are made in both internal and external configurations.
• 
•  
• 
• 
• 
•  
• 
•